- What is soft PZT
- What is hard PZT
- soft PZT vs hard PZT
- What are soft piezoelectric materials
- Applications of Soft Piezoelectric Materials
- What are hard piezoelectric materials
- Applications of Soft Piezoelectric Materials
- How to choose a suitable piezoelectric material
1、What is soft PZT?
Soft PZT is the abbreviation of Soft Piezoelectric Materials
Soft PZT refers to a type of ferroelectric piezoelectric ceramic with high mobility of the dipole or magnetic domain, which indicates polarization and depolarization characteristics. They are suitable for use in piezoelectric actuators and sensors due to their small polarity reversal field strength. Soft PZT materials have the advantage of a large piezoelectric strain constant, moderate dielectric constant, and high coupling factor.
2、What is hard PZT？
Hard PZT is the abbreviation of Hard Piezoelectric Materials
Hard PZT materials can withstand high electrical and mechanical stress, and their properties remain almost unchanged under these conditions. They are mainly used in high-power acoustics. The advantages of hard PZT materials are their moderate dielectric constant, large piezoelectric coupling factor, high mechanical quality, and good stability under high mechanical load and large working field strength. They generate little heat internally and have low dielectric loss, making them suitable for sustained use in resonance modes.
3、Soft PZT vs Hard PZT
Soft PZT and hard PZT have opposite characteristics. Soft PZT has a large electromechanical coupling coefficient, large piezoelectric constant, high dielectric constant, high dielectric loss, low mechanical quality factor, and poor linearity. Compared to hard PZT, they produce larger displacements and wider signal bandwidths but exhibit larger hysteresis and are more prone to depolarization or other degradation. The lower Curie point (usually below 300°C) requires the use of soft PZT at lower temperatures. The relatively large dielectric constant and loss factor can limit or eliminate the use of soft PZT in applications requiring high-frequency input and high electric field combinations.
Hard PZT has characteristics opposite to soft PZT, including a Curie point above 300°C, small piezoelectric charge constant, large electromechanical coupling factor, and high mechanical quality factor. They are also more difficult to polarize or depolarize. Although hard PZT is usually more stable than soft PZT, they cannot produce the same magnitude of displacement. Hard PZT can withstand high mechanical loads and high voltages.
| Characteristic | Soft PZT | Hard PZT |
| Piezoelectric Constants | larger | smaller |
| Permittivity | higher | lower |
| Dielectric Constants | larger | smaller |
| Dielectric Losses | higher | lower |
| Electromechanical Coupling Factors | larger | smaller |
| Electrical Resistance | very high | lower |
| Mechanical Quality Factors | low | high |
| Coercive Field | low | higher |
| Linearity | poor | better |
| Polarization / Depolarization | easier | more difficult |
Piezo ring PZT-5H[/caption]
5、Applications of soft piezoelectric materials
The important application areas of soft piezoelectric ceramics include actuators (used for micro-positioning and nano-positioning), traditional vibration detectors, sensors such as ultrasound transmitters and receivers (used for flow or level measurement, target identification or monitoring), as well as audio applications such as sound sensors, microphones, and instrument pickups.
6、What are the hard piezoelectric materials?
Hard piezoelectric materials mainly include PZT-P4 (NAVY TYPE I), PZT-P8 (NAVY TYPE III).
Our company's corresponding products are:
PZT-40 ,PZT-41 ,PZT-42, PZT-43 ,PZT-43HD, PZT-44, PZT-45, PZT-45HD, PZT-46, PZT-47, PZT-48
Features:
Large electromechanical coupling factor, high quality factor, good electromechanical stability, and high compressive strength.
7、Applications of hard piezoelectric materials
High-power audio applications particularly benefit from the properties of hard piezoelectric materials. Application areas include ultrasonic cleaning (typically in the kilohertz frequency range), material machining (ultrasonic welding, pressure welding, drilling, etc.), ultrasonic processors (such as for spraying liquid media), medical field (ultrasonic removal of dental plaque, surgical instruments, etc.), and sonar technology.
8、How to choose the appropriate piezoelectric material?
The first and most important factor to consider when choosing a piezoelectric material is its piezoelectric properties. These properties are the measure of a material's ability to convert mechanical energy into electrical energy and vice versa. Some key piezoelectric properties to consider include the piezoelectric coefficient, dielectric constant, mechanical quality factor, and electromechanical coupling factor. The piezoelectric coefficient is a measure of a material's ability to convert mechanical energy into electrical energy and vice versa. It is typically measured in units of charge per unit force or voltage per unit strain. Higher piezoelectric coefficients indicate higher efficiency in energy conversion.
